Auckland distributors of Polycraft Boats, Clevedon Marine.
These affordable low maintenance Polycraft
boats have quickly established themselves as a viable alternative to the
mainstream alloy and fibreglass boats already available in the market place.
All Polycraft boats are rotationally moulded creating a one-piece seamless dual
skin hull, with no seams and no weak points. Polyethylene is not susceptible to
electrolysis or osmosis, never needs painting, is easy to clean, is UV stable,
requires little or no maintenance and has a greater impact resistance than
fibreglass.
Another distinct advantage of Polyethylene is its hardwearing durability; when
you consider the conditions and obstacles you can encounter when on the water.
With encounters with boat ramps, jetties, rocks, and the like common place you
can be assured that a Polycraft boat will fare a lot better compared to alloy
and fibreglass boats with painted or gel coated surfaces. All these benefits
make a Polycraft boat the smart choice when choosing a boat.
The ride characteristics of a Polycraft boat compared to an aluminium boat have
to be experienced to be believed. The low density Polyethylene used in the
manufacturing process is designed to be flexible enhancing the on water
performance of the hull by flexing and absorbing wave impacts and noise into the
hull and not the passengers. This creates a smooth quite ride that is unique to
Polycraft boats.
|
4.55 FRONTRUNNER
The 4.55 Frontrunner is the most popular model in the Quickcraft range due
to its versatility for fishing or family boating.
SPECIFICATIONS
Length overall: 4.55m
Beam: 1.99m
Depth: 0.92m
Weight (hull only): 360kg
Shaft length: 20 inches
Max HP rating: 60HP
Capacity: 4 (300kg)
The dual console units provide protection from the elements for the driver,
the passenger and the dash mounted electronics.
Two upholstered swivel seats located behind the consoles provide comfortable
seating with extra storage in the pedestal units for tackle and batteries.
An optional pair of ski hooks allows the use of tubes and wakeboards for fun
days on the water with family and friends.
The front casting deck is accessed by the walkway between the consoles for
fishing and easy access to the anchor.
The Frontrunners lay out also provides ample room in the back of the boat
for fishing with extra passenger seating located in each corner on moulded
seat pods.
The deep V hull design is suitable for inshore fishing or chasing Snapper.
STANDARD FEATURES
Front 120 Litre Storage Bin
Full Floor
Twin Consoles
Tinted Screens
Steering Cable and Helm
2 Upholstered Swivel Seats and Pedestals
Bow Rails
Bow Roller
Cleat
Winch Point
Anchor Well
Drain Bungs
Rod Holders (2)
Hand Rails
Padded Swivel Seat
Passenger Hand Rail
Aluminium Transom Plate
OPTIONAL EXTRAS
70 Litre Poly Under-floor Fuel Tank With Sender
Canopies
Boarding Rails
Boarding Ladder
Swivel Seats
120 Litre chilly Bin / Storage Seat
Centre Seat
Three Piece Cushion Set
Bow Rails
Ski Hooks
Bait Board with Rod Holders
Carpet
Positive Flotation for Commercial or Survey Requirements
|
|
4.55 CENTRE CONSOLE
A dedicated fishing boat for the enthusiast who needs the hands on
capabilities that a centre console layout provides.
SPECIFICATIONS
Length overall: 4.55m
Beam: 1.99m
Depth: 0.92m
Weight (inc floors): 330kg
Shaft length: 20 inches
Max HP rating: 60HP
Capacity: 4 (300kg)
The Console unit is located in a central position for all-round visibility
while also maximising available floor space for fishing.
It also provides protection for both driver and dash mounted electronics and
has a large amount of internal storage for associated gear.
Access to front casting deck and anchor well is unobstructed with ample room
between the console and side wall.
An optional rear casting deck with built in storage is also available.
Available in survey for commercial applications.
STANDARD FEATURES
Front 120 Litre Storage Bin
Full Floor
Centre Console with Tinted Screen
Grab Rail
Steering Cable and Helm
Bow Roller
Cleat
Winch Point
Anchor Well
Drain Bungs
Rod Holders (2)
Hand Rails
Padded Swivel Seat
Passenger Hand Rail
Aluminium Transom Plate.
OPTIONAL EXTRAS
70 Litre Poly Under-floor Fuel Tank with Sender
Canopies
Boarding Rails
Boarding Ladder
Swivel Seats
120 Litre Chilly Bin / Storage Seat
Centre Seat
Three Piece Cushion Set
Bow Rails
Ski Hooks
Bait Board with Rod Holders
Carpet
Positive Flotation for Commercial and/or Survey Requirements.
|
It's hard to imagine any place with a greater dedication to boating than New
Zealand. In fact, does another place exist? After all, New Zealand has one of
the longest coastlines in the world, the population is seen to migrate to the
beach every summer and their affinity for water and boats is incredible.
The above examples are currently in stock at our
Clevedon boating centre. They are currently set up ready to go with Honda Marine outboard motors.
Clevedon! "Your one stop fishing shop"
©
